UV-C LED water disinfection unit
MAINTENANCE FREE
Since LEDs do not have a start or warm-up phase, they are only switched on at the same time as water is drawn off, which not only results in very low power consumption, but also a long service life of several years – and that without changing the lamp. During the annual maintenance of the fresh water system, the UV disinfection unit is cleaned automatically. Therefore, our UV disinfection unit is maintenance-free.
ECO-FRIENDLY
The UV disinfection unit from WM aquatec is the first fully automatic water disinfection unit of its kind, especially for use in mobile homes, which switches on automatically when water is drawn off and thus guarantees hygienically perfect water worldwide! Contrary to the previous UV technology, no environmentally hazardous, mercury-containing gas discharge lamps are used here, but the latest UV-C LED technology.
Without chemicals
The water to be disinfected is irradiated with short-wave UV light in the range of 240-290 nanometers. The genetic information of the microorganisms contained in the DNA absorbs the energy of the UV-C radiation and is destroyed in the process. Viruses and bacteria can be effectively inactivated and prevented from multiplying by means of UV-C radiation. This purely physical process enables the water to be sterilized (up to 99.999%) without the use of chemical disinfectants.
At a glance
- water disinfection 100% without chemicals using the latest, innovative UV-C LED technology
- disinfection performance up to 99.999%
- up to 8 l/min flow rate
- suitable for submersible and pressure pumps*
- mercury-free and no harmful disinfection by-products
- low power consumption due to disinfection directly at the point of water withdrawal
- easy to retrofit into existing fresh water systems
- incl. connection material (electrical and water side)
- can be used for over 13 years with unlimited switching cycles
- maintenance-free – no lamp replacement necessary
- safe operation through integrated current and function monitoring,
- temperature monitoring, service life monitoring, power supply monitoring and signaling (optical & acoustic)
*in exceptional cases (sensor-controlled pumps) the use of an ext. flow sensor may be required
installation example
Accessories and spare parts
FAQ & Downloads
Under the following link you will find further information:
Technical Data | ||||
---|---|---|---|---|
Dimensions without connections | 113 x 159 x 105mm (W x H x D) | |||
Flow rate | up to 8.0l/min | |||
Disinfection performance | up to 99.999% | |||
Water connections | 9/10mm and 12/13mm hose nozzle | |||
Weight | 0.9kg | |||
Water pressure | max. 8.3bar | |||
Service life | 5.000h water withdrawal | |||
Ambient temperature | max. 55°C | |||
Recommended water temperature | 0-38°C | |||
Power supply | 11-18VDC | |||
Max. power consumption | 0.02A (Standby)/1.2A (operating mode) | |||
Power max. | 14W | |||
Signal input UV-C unit | Voltage | Current | Frequency | |
Pump | 11-18VDC | - | - | |
Flow sensor | 5-24VDC | min. 1mA | 1-200Hz |